Sensor Ferrule, 1mm x 2.2mm, Light-seal®

Sensor Ferrule, 1mm x 2.2mm, Light-seal®

Part#: FF-LSSF2.2-A
2.2mm diameter ferrule, for swaging directly onto fiber of bare POF cable.

About Light-Seal®
Light-Seal® is a connector technology that swages the end of the connector to secure and align the fiber concentrically to the outside of the connector ferrule, ensuring minimal lateral fiber offset when the connector is mated to a receptacle.

In the connector, fiber is held in place independently from the cable's jacket, preventing pistoning between the fiber and connector assembly. This eliminates the need for adhesives, making for a simple field installation process. This design also minimizes the potential for contaminants to enter the connector between the fiber and connector hole.

Light-Seal® is covered by U.S. patent number 6,517,255.
  • Buy 100-199 for $0.60 each and save 14%
  • Buy 200-499 for $0.57 each and save 18%
  • Buy 500-999 for $0.50 each and save 28%
  • Buy 1000- for $0.48 each and save 31%

Details

Product Attachments

View FileLight-Seal SWAGE - Datasheet    Size: (173.69 KB)

Light-Seal® is a patented technology* that swages the end of the connector to secure and align the fiber concentric to the outside of the connector ferrule, thus assuring minimal lateral fiber offset when the connector is mated to another connector or to an active device.

 This technology also serves to minimize the probability of contaminates in the connector between the fiber and the connector hole, It also holds the fiber independently from the cable jacket to prevent “ Pistioning” so no epoxy or adhesives need to be used and this insures a very simple field installable connector system.

View FileFF-LSSF2.2-X - Datasheet    Size: (79.92 KB)

Light-Seal® is a patented technology* that swages the end of the connector to secure and align the fiber concentric to the outside of the connector ferrule, thus assuring minimal lateral fiber offset when the connector is mated to another connector or to an active device.

2.2mm OD

1mm ID

View FileFF-LSSF2.2-A - Customer Print    Size: (287.29 KB)

Light-seal, sensor ferrule, 1mm x 2.2mm, Mat'l Aluminum

This technology also serves to minimize the probability of contaminates in the connector between the fiber


Inventory: 15654 As of November 12, 2019
Starting at:

Availability: In stock

$0.69
Each