• Terminates and finishes duplex 2.2mm outer diameter POF cable
• Strips jacket of POF cable to user-adjustable length between 4 and 20 mm
• Uses rounded blade to strip jacket without damaging fiber
• Safe, easy-to-use design
• Rough cut blade
• Tool has burnished body, two-component handles
Tool for Cutting and Stripping of DUPLEX Cable 2 x Ø 2.2 mm
RENNSTEIG WERKZEUGE, ISO 9001:2008 certified company.
Made in Germany
This POF finishing tool was tailored for the professional installer, giving them a single tool that can perform all the steps of installation. It terminates fiber without polishing and strips the POF cable jacket to the proper length with consistent results. Termination is done by clamping the POF cable into place in the tool, and squeezing.
A precise, round razor blade cuts the cable with a scissor-like action without damaging the fiber. Damage to the fiber is common in this process when a normal razor blade is used, as the exit cut chips the fiber and cladding. With the FiberFin termination system, average attenuation loss is between 1.0 and 1.5 dB.
The special blade used in the FiberFin POF Finishing "All In One" Tool is mounted on a gear assembly that rotates the blade after each cut, allowing the blade to wear evenly and give consistent termination results. After 1,270 cuts, the assembly will lock the tool open, and prevent usage until the cutting head is replaced, ensuring that every cut performed is of the highest quality.
With the cutting system fully enclosed, this tool is both safe and user-friendly.
More information on this product is available directly from the OEM here